Program
| Time |
Event |
(+)
|
|
13:00 - 13:40
|
REGISTRATION - Conference registration - HALL |
|
|
13:40 - 14:00
|
INTRODUCTION (Da Vinci) |
|
|
14:00 - 16:00
|
Symposium Cold Spray - CS1 (Da Vinci) |
(+)
|
|
14:40 - 15:00 |
› Experimental and Numerical Study on the Particle Deformation during the Impact of Cold Sprayed Particles - Paul Breuninger, Institute of Particle Process Engineering, Technische Universität Kaiserslautern |
|
|
15:00 - 15:20 |
› Particle Tracking Velocimetry measurements inside a transparent supersonic Cold Spray nozzle: velocity, dispersion, feed rate effects and comparison against CFD models - Rocco Lupoi, Trinity College Dublin, The University of Dublin |
|
|
15:20 - 15:40 |
› Particle Velocimetry in Cold Spray and the Pathway to a Complete Understanding of the Data - Ozan Ozdemir, Department of Mechanical and Industrial Engineering, Northeastern University |
|
|
15:40 - 16:00 |
› Particles in-flight flow during cold spraying: analysis of dispersion phenomena - Rija RAOELISON, Université de Bourgogne Franche-Comté - UTBM, Laboratoire Interdisciplinaire Carnot de Bourgogne, UMR 6303 CNRS - Sophie COSTIL, Université de Bourgogne Franche-Comté - UTBM, Laboratoire Interdisciplinaire Carnot de Bourgogne, UMR 6303 CNRS |
|
|
14:00 - 14:40
|
Keynote (Da Vinci) |
|
|
14:40 - 16:00
|
Tribology & Fatigue - TF (Coulomb) |
(+)
|
|
14:40 - 15:00 |
› Material selection procedure for medical devices with mechanical and tribological requirements - David MERCIER, Ansys, inc |
|
|
15:00 - 15:20 |
› High Cycle Fatigue behavior of 316L stainless steel treated by Ultrasonic SMAT - Clément Dureau, Laboratoire dÉtude des Microstructures et de Mécanique des Matériaux, Institut Pprime |
|
|
15:20 - 15:40 |
› Initiation and propagation of fatigue cracks from surface imperfections on 304L austenitic stainless steel - Catherine Gardin, Institut Pprime |
|
|
15:40 - 16:00 |
› Tribological and corrosion properties of NiW alloys deposited onto low alloyed steel : Relationship between metallurgical features and functional properties - Juan Creus, Laboratoire La SIE Université de La Rochelle |
|
|
16:00 - 16:20
|
Coffee break (Rabelais) |
|
|
16:20 - 18:20
|
Symposium Cold Spray - CS2 (Da Vinci) |
(+)
|
|
16:20 - 16:40 |
› The Low-Velocity Impact Behaviour of Innovative Polymer-based Composite Structures - Antonio Viscusi, Department of Chemical, Materials and Industrial Production Engineering, University of Naples Federico II |
|
|
16:40 - 17:00 |
› Single-Particle Deposition as a Method to Study the Deposition Process of Polymeric Materials by Cold Gas Spray - Nuria Salazar, Thermal Spray Center - Irene G. Cano, Thermal Spray Center |
|
|
17:00 - 17:20 |
› Novel Surface Functionalization for Fibre Reinforced Thermoset Polymers to Promote the Adhesion of Cold Sprayed Metallic Coatings - Pierpaolo Carlone, University of Salerno - Antonello Astarita, University "Federico II" of Naples |
|
|
17:20 - 17:40 |
› Cold Spray of aluminum powders on thermoplastic based composite substrates: a comparison between short and long reinforcing fibers. - Alessia Serena Perna, University of Naples Federico II, University of Bergamo |
|
|
17:40 - 18:00 |
› Metallization by cold spray of complex shape 3D printed polymers and polymer based composites - PATRIZIO LOMONACO, Centre des Matériaux |
|
|
18:00 - 18:20 |
› Cold spray metallization of polymers: a comparison between Cu/PEEK and Cu/Cu combinations and effect of the PEEK behaviour on the bonding strength and the deposition efficiency - Sophie COSTIL, Université de Bourgogne Franche-Comté - UTBM, Laboratoire Interdisciplinaire Carnot de Bourgogne, UMR 6303 CNRS |
|
|
16:20 - 18:20
|
Laser Treatments - LT (Coulomb) |
(+)
|
|
16:20 - 16:40 |
› High Speed texturing and functionalization of copper surfaces through QCW Green laser processing - Erwan Guenier, Thermomechanical Metallurgy Laboratory – PX Group Chair, Ecole Polytechnique Fédérale de Lausanne (EPFL) |
|
|
16:40 - 17:00 |
› Laser patterned Superhydrophobic and Oleophobic Surface Structures on Glass - R Jagdheesh, HiLASE Centre, Institute of Physics, Czech Academy of Sciences |
|
|
17:00 - 17:20 |
› Design of biomimetic coatings to mitigate dairy fouling adhesion - Manon SAGET, Unité Matériaux et Transformations - UMR 8207, Institut d'Électronique, de Microélectronique et de Nanotechnologie (IEMN) - UMR 8520 |
|
|
17:20 - 17:40 |
› Laser Shocks, a smart tool for materials interface dynamic loading - Michel Boustie, Institut Pprime |
|
|
17:40 - 18:00 |
› MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATIONS OF METALLIC SURFACES AFTER LASER TEXTURING - Sophie COSTIL, ICB LERMPS |
|
|
18:00 - 18:20 |
› Nanostructured metallic glass films with superior and tunable mechanical properties: applications for stretchable electronics - Matteo Ghidelli, Laboratoire des Sciences des Procédés et des Matériaux |
|
|
18:30 - 23:55
|
Cocktail buffet (Rabelais) |
|
Wednesday, April 14, 2021
| Time |
Event |
(+)
|
|
08:30 - 09:10
|
Keynote (Da Vinci) |
|
|
09:10 - 10:30
|
Symposium Cold Spray - CS3 (Da Vinci) |
(+)
|
|
09:10 - 09:30 |
› Local scratch resistance of high-pressure cold sprayed Inconel 625 coatings. Effect of processing parameters. - Pedro Poza, Universidad Rey Juan Carlos [Madrid] |
|
|
09:30 - 09:50 |
› The Effect of Cold Spray Process Parameters on Coating Porosity - Sara Bagherifard, Politecnico di Milano, Department of Mechanical Engineering |
|
|
09:50 - 10:10 |
› A study on the relation between porosity and ultrahigh vacuum gas tightness in aluminum based cold sprayed coatings - Sébastien Weiller, Centre des Matériaux |
|
|
10:10 - 10:30 |
› Residual stresses during and after cold spray deposition with an emphasis on tantalum - Samuel LETT, CEA Le Ripault |
|
|
09:10 - 10:30
|
Sliding Contacts - SC1 (Coulomb) |
(+)
|
|
09:10 - 09:30 |
› Thermal and mechanical effects of PTFE and PEEK coatings on the performance of parallel surface thrust bearings; comparison with Babbitt coatings and mixed coating solutions - Anastassios Charitopoulos, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI, National Technical University of Athens |
|
|
09:30 - 09:50 |
› Effect of partial wall slip on the TEHD behaviour of coated plain journal bearings - Shuhui CUI, Harbin Institute of Technology, Institut Pprime |
|
|
09:50 - 10:10 |
› Development of hydrophobic surfaces for lubrication applications - Noël BRUNETIERE, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI |
|
|
10:10 - 10:30 |
› Simulation of 3D interface temperature distribution in a sliding contact under severe contact conditions - JIAN CAO, Laboratoire de Tribologie et Dynamique des Systèmes |
|
|
10:30 - 10:50
|
Coffee break (Rabelais) |
|
|
10:50 - 12:10
|
Symposium Cold Spray - CS4 (Da Vinci) |
(+)
|
|
10:50 - 11:05 |
› Hydrogen embrittlement resistance of Al-Zn-Al2O3 coatings deposited by cold gas dynamic spray on pipeline steel - Mehand Tebib, Centre des Matériaux |
|
|
11:05 - 11:20 |
› The Effect of Tool-path Strategy in Cold Spray Deposition for Additive Manufacturing and Repair in Tool Industries - Sara Bagherifard, Politecnico di Milano, Department of Mechanical Engineering |
|
|
11:20 - 11:35 |
› The Intromission of Cold Spray Technology in High Volume Production of Components made of Non Traditional Materials - JULIO VILLAFUERTE, CenterLine Windsor Ltd |
|
|
11:35 - 11:50 |
› Investigation of the Effect of Heat Treatment and Impact Angle on Erosion Performance of Nickel-Tungsten Carbide Cold Spray Coatings by Design of Experiment - Kazasidis Marios, Department of Mechanical and Manufacturing Engineering [Dublin] |
|
|
11:50 - 12:05 |
› Tribology of cold sprayed steel based composite coatings - Laurent Aubanel, Technocentre Renault [Guyancourt], Centre des Matériaux |
|
|
10:50 - 12:10
|
Sliding Contacts - SC2 (Coulomb) |
(+)
|
|
10:50 - 11:10 |
› Effect of face texturing on mechanical seals - Lassad AMAMI, Technical Center of Mechanical Industries |
|
|
11:10 - 11:30 |
› Influence of the position, shape and number of journal surface scratches on the performance of a two-lobe journal bearing - comparison between experimental data and numerical results - Anh VO, Institut Pprime |
|
|
11:30 - 11:50 |
› Optimization of Rectangular Face Seals with Surface Texturing - Dilek Bulut, Institut für Konstruktion und Tribologie, Leibniz Universitaet Hannover |
|
|
12:10 - 14:00
|
Lunch (Rabelais) |
|
|
14:00 - 15:40
|
Symposium Cold Spray - CS5 (Da Vinci) |
(+)
|
|
14:00 - 14:20 |
› Influence of primary carbide size on coating characteristics of high velocity sprayed WC-Co-Cr powders - Guido Reisel, Oerlikon Metco WOKA GmbH |
|
|
14:20 - 14:40 |
› Development and in-vitro characterization of bioactive glass coated surfaces by APS and CGS - Beatriz Garrido, Thermal Spray Center |
|
|
14:40 - 15:00 |
› Reinforced Composite Materials Hybridization by Low Pressure Cold Spray Additive-Coating: structural analysis and micro-hardness - SEVERINE A.E. BOYER, MINES ParisTech PSL |
|
|
15:00 - 15:20 |
› Metallisation of 3D-printed Onyx using a low pressure cold spray technology - Roberta Della Gatta, Department of Chemical, Materials and Industrial Production Engineering, University of Naples Federico II |
|
|
15:20 - 15:40 |
› Innovative composite approach to metal-ceramic-polymer coatings obtained by Cold Spray for tribological applications in the automotive industry - GLWADYS GARCIN, Renault, MINES PartisTech, PSL Research University, MAT – Centre des Matériaux |
|
|
14:00 - 15:40
|
Rolling Contacts - RC (Coulomb) |
(+)
|
|
14:00 - 14:20 |
› Friction analysis during deformation of steels under hot-working conditions - Ivan SEREBRIAKOV, Université Polytechnique Hauts-de-France |
|
|
14:20 - 14:40 |
› An experimental assessment of micro-pitting fatigue life of rolling contact bearing elements - Zulfiqar Khan, School of Design, Engineering and Computing [Bournemouth University] |
|
|
14:40 - 15:00 |
› Engineering software on the simulation of point contact using the Multi-physics software - Zhen Li, MIIT Key Laboratory of Aerospace Bearing Technology and Equipment, Harbin Institute of Technology |
|
|
15:00 - 15:20 |
› Rolling Contact Fatigue Analyses of nitrided parts Part I: Experimental Approach - Fabrice VILLE, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] |
|
|
15:20 - 15:40 |
› Rolling Contact Fatigue Analyses of nitrided parts Part II: Numerical Approach - Fabrice Ville, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] |
|
|
15:40 - 16:00
|
Coffee break (Rabelais) |
|
|
16:00 - 17:20
|
Symposium Cold Spray - CS6 (Da Vinci) |
(+)
|
|
16:00 - 16:20 |
› New duplex surface treatment of metallic alloys combining cold-spray and plasma electrolytic oxidation technologies - Julien Martin, Institut Jean Lamour |
|
|
16:20 - 16:40 |
› Study of Ni-based cold spray coatings as build platform for laser beam melting additive manufacturing - Cléa PLOUZE, MINES ParisTech - PSL Research University |
|
|
16:40 - 17:00 |
› High power laser assisted cold spray and in-situ laser annealing of engineering alloys - Philip McNutt, TWI Ltd [Cambridge] |
|
|
17:00 - 17:20 |
› A new strategy for strengthening additively manufactured cold spray deposits through in-process densification - Shuo Yin, Trinity College Dublin, The University of Dublin |
|
|
16:00 - 17:20
|
Nanomaterials - NM (Coulomb) |
(+)
|
|
16:00 - 16:20 |
› Functional aluminum surfaces by incorporation of TiO2 nanoparticles in anodized layers - Sigrid Benfer, DECHEMA-Forschungsinstitut |
|
|
16:20 - 16:40 |
› Inorganic Nanoparticles with Photochromic Properties - Manuel Gaudon, Institut de Chimie de la Matière Condensée de Bordeaux (ICMCB) |
|
|
16:40 - 17:00 |
› Functionalization of cellulose nanocrystals by non thermal plasma in liquid-gas media - Elodie Fourré, INSTITUT DE CHIMIE DES MILIEUX ET MATERIAUX DE POITIERS |
|
|
17:00 - 17:20 |
› Nanostructuration of TA6V alloy for mechanical applications - Cécile Langlade, ICB-LERMPS, Univ. Bourgogne Franche-Comté, rue de Leupe, 90010 Belfort cedex - Luc LAVISSE, Laboratoire Interdisciplinaire Carnot de Bourgogne [Dijon] |
|
|
17:30 - 20:00
|
Cocktail during the poster session (Rabelais) |
|
|
17:30 - 20:00
|
Posters (Rabelais) |
(+)
|
|
17:30 - 20:00 |
› 3D-Printed ONYX-based Composites coated with Aluminum powders: a first study on the feasibility - Antonello Astarita, Department of Chemical, Materials and Industrial Production Engineering, University of Naples Federico II |
|
|
17:30 - 20:00 |
› Characterization and nitriding behavior of AlxCoCrFeNi HEA produced by powder metallurgy - Luc PICHON, Institut Pprime |
|
|
17:30 - 20:00 |
› Corrosion behavior of TiO2 nanotubes layer produced by anodization of Ti–6Al–4V alloy - Mariana Staia, Escuela de Ingeniería y Ciencia de los Materiales, Facultad de Ingeniería, Universidad Central de Venezuela, Caracas 1041, Venezuela |
|
|
17:30 - 20:00 |
› Design of Ti-Sn-Nb and Ti-Sn-Zr-Nb superelastic thin films by sputter-deposition - Thibaud Choquet, Institut des Sciences Chimiques de Rennes, Institut Pprime, Département de Physique et Mécanique des Matériaux, UPR 3346, CNRS-Université de Poitiers-ENSMA, SP2MI |
|
|
17:30 - 20:00 |
› Experimental study on the effect of spraying distance on microstructural and tribological behavior of flame sprayed Ni alloy coatings. - Abdelhek IDIR, Laboratoire de Mécanique, Matériaux et Energétique (L2ME), Faculté de Technologie, Université de Bejaia, 06000 Bejaia, Algérie. |
|
|
17:30 - 20:00 |
› Influence of surface state of 316L stainless steel substrate in the topography, mechanical and tribocorrosion responses of Si/Zr based sol-gel. - Alex Montagne, Mechanics surfaces and materials processing |
|
|
17:30 - 20:00 |
› Modification of mechanical properties of thin aluminum sample due to laser shock peening - Jérémie Tartière, Airbus Operations SAS, ENSTA Bretagne |
|
|
17:30 - 20:00 |
› Opportunities of stainless steel cold gas deposition for repairing metallic structures - Ana M. Martos, Thermal Spray Center |
|
|
17:30 - 20:00 |
› Radiation stability of amorphous ZrCu films after He implantation - Grégory ABADIAS, Institut Pprime, Département de Physique et Mécanique des Matériaux, CNRS-Université de Poitiers-ENSMA |
|
|
17:30 - 20:00 |
› Surface analyses of defaults in FDM 3D printed bio-polymer composites: the materials surface as a tool to optimize key processing parameters - SEVERINE A.E. BOYER, MINES ParisTech PSL |
|
|
17:30 - 20:00
|
Prometee visit - Visit of the experimental part of the Prometee |
|
| Time |
Event |
(+)
|
|
08:30 - 09:10
|
Keynote (Da Vinci) |
|
|
09:10 - 10:30
|
Symposium Cold Spray - CS7 (Da Vinci) |
(+)
|
|
09:10 - 09:25 |
› Micro-scale adhesion strength evaluation for the solid-phase bonded single particle - Kizashi Iwakiri, Fracture and Reliability Research Institute, Tohoku University |
|
|
09:25 - 09:40 |
› Tailoring the tribological properties of Babbitt cold-sprayed coatings by heat thermal post-treatment - Vicente Albaladejo-Fuentes, Thermal Spray Center |
|
|
09:40 - 09:55 |
› Laser surface texturing to increase adhesion of metallic repair coating deposited by cold spraying - Robin KROMER, Université de Bordeaux |
|
|
09:55 - 10:10 |
› Metallographic assessment of interface adhesion of 316L stainless steel cold spray coatings - Laury-Hann Brassart, Centre des Matériaux, Matériaux et Mécanique des Composants |
|
|
10:10 - 10:25 |
› Cold Gas Spraying of Nickel-Titanium Coatings for Protection against Cavitation - Georg Mauer, Forschungszentrum-Jülich GmbH, Institute of Energy and Climate Research (IEK-1) |
|
|
09:10 - 10:30
|
Additive Manufacturing - AM1 (Coulomb) |
(+)
|
|
09:10 - 09:30 |
› Development and characterization of Micro-plasma Additive Manufacturing Process for Inconel 718 Superalloy - Xiao Huang, Carleton University |
|
|
09:30 - 09:50 |
› Effect of high temperature exposure on the mechanical properties of Inconel 625 coatings deposited by compact plasma spray - Miguel Angel Garrido Maneiro, Universidad Rey Juan Carlos [Madrid] |
|
|
09:50 - 10:10 |
› Surface roughness reduction of Invar material produced by Binder Jetting Additive Manufacturing Technology - M.Belen Garcia-Blanco, Cidetec |
|
|
10:10 - 10:30 |
› Growth morphology of nitride coatings deposited at glancing angle incidence: experiments vs. simulations - Rubenson Mareus, Institut Pprime, Département de Physique et Mécanique des Matériaux, CNRS-Université de Poitiers-ENSMA - Grégory ABADIAS, Institut Pprime, Département de Physique et Mécanique des Matériaux, CNRS-Université de Poitiers-ENSMA |
|
|
10:30 - 10:50
|
Coffee break (Rabelais) |
|
|
10:50 - 12:30
|
Symposium Cold Spray - CS8 (Da Vinci) |
(+)
|
|
10:50 - 11:10 |
› Comparison of three different 316L powders sprayed by Cold Gas Spray – influence on the coating properties and performance - Rodolpho F. Vaz, Thermal Spray Center |
|
|
11:10 - 11:30 |
› Influence of heat treatment on cold spray deposition and properties of 2XXX, 6XXX and 7XXX Al alloy powder - Henry Begg, TWI Ltd [Cambridge] |
|
|
11:30 - 11:50 |
› Combined laser shock and micro-compression approach to the mechanical behavior of powders for cold spray - hugo Durand, Centre des Matériaux |
|
|
11:50 - 12:10 |
› Tin Coatings Deposition Efficiency Optimization Using Recycled Particles and Low-Pressure Cold Spray - Liliana ZARAZUA VILLALOBOS, ELyTMaX, Fracture and Reliability Research Institute, Tohoku University |
|
|
12:10 - 12:30 |
› Through-Process Modeling of the Cold Spray Process to Determine Effects of Powder Properties - Danielle Cote, Worcester Polytechnic Institute |
|
|
10:50 - 11:30
|
Additive Manufacturing - AM2 (Coulomb) |
(+)
|
|
10:50 - 11:10 |
› Structuration in polymer composites in FDM 3D printing: intelligent combination of experimental measurement and new fluid-solid modeling approaches - SEVERINE A.E. BOYER, MINES ParisTech PSL |
|
|
11:10 - 11:30 |
› Corrosion mechanisms of electrodeposited Zn and Zn-Fe coatings on steel substrate in saline environments - Céline Arrighi, Materials Science Department, Faculty of Engineering, University of Mons, LaSIE UMR 7356 CNRS, La Rochelle Université |
|
|
11:30 - 12:30
|
Other Coatings Technology - OC1 (Coulomb) |
(+)
|
|
11:30 - 11:50 |
› Elaboration and characterization by nanoindentation of novel Ti-based superelastic and biocompatible alloy films - ying ZHOU, Institut National des Sciences Appliquées - Rennes |
|
|
11:50 - 12:10 |
› Elaboration and characterization of TixHf1-xN thin films - Guillaume Desbordes, Institut de Recherche sur les Ceramiques, Centre d'Ingénierie en Traitements et Revêtements de Surface Avancés |
|
|
12:10 - 12:30 |
› Piezo-resistivity and elastic behavior investigations in ITO thin films deposited on polymer: influence of ion type for sputtering. - Thibault Chommaux, Institut Pprime |
|
|
12:30 - 14:00
|
Lunch (Rabelais) |
|
|
14:00 - 15:20
|
Symposium Thermochemical Treatments - TT1 (Da Vinci) |
(+)
|
|
14:00 - 14:20 |
› Surface engineering of titanium alloy TiAl6V4 by multi-interstitial diffusion using plasma processing - Michel Drouet, Institut Pprime |
|
|
14:20 - 14:40 |
› Robust white surfaces on dental implants; Controlled oxide layer formation on titanium by thermochemical treatment - Andreas F K Körkel, DTU Materials and Surface Engineering |
|
|
14:40 - 15:00 |
› Advances in thermochemical surface engineering and heat treatment of titanium and titanium alloys - Thomas Christiansen, Technical University of Denmark |
|
|
15:00 - 15:20 |
› Metal surfaces functionalization: some properties of nitrided linear asperities in dry sliding conditions - Gregory Marcos, Laboratoire d'Excellence Design of Alloy Metals for low-mAss Structures, Institut Jean Lamour |
|
|
14:00 - 15:20
|
Corrosion - C01 (Coulomb) |
(+)
|
|
14:00 - 14:20 |
› A comparison of PEO coatings formed on MgLi alloy and pure Mg - TING WU, Magnesium Innovation Centre, Helmholtz-Zentrum Geesthacht |
|
|
14:20 - 14:40 |
› Fabrication of Robust Reduced Graphene Oxide Based Superhydrophobic Carbon Steel Surfaces Using Electrochemical Codeposition Approach - Geetisubhra Jena, 1. Corrosion Science and Technology Division, Metallurgy & Materials Group, MCG, Indira Gandhi Centre for Atomic Research, Homi Bhabha National Institute |
|
|
14:40 - 15:00 |
› Superhydrophobic and self-healing coating for corrosion protection on magnesium alloy - WENHUI Yao, Chongqing University [Chongqing] |
|
|
15:00 - 15:20 |
› Barrier properties of Sol-Gel layer applied on PEO porous coatings for AA2024 corrosion protection - Luciane Santos, Materials Science Department, Faculty of Engineering, University of Mons, Metallurgy Department, Faculty of Engineering, University of Mons |
|
|
15:20 - 15:40
|
Coffee break (Rabelais) |
|
|
15:40 - 17:00
|
Symposium Thermochemical Treatments - TT2 (Da Vinci) |
(+)
|
|
15:40 - 16:00 |
› ANISOTROPIC WETTING ON TOPOGRAPHICAL STRIPES OBTAINED ON AUSTENITIC STAINLESS STEEL BY PLASMA PATTERNING AND NITRIDING - Thierry Czerwiec, IJL |
|
|
16:00 - 16:20 |
› Comparison of anion exchange kinetics in Zn-Al layered double hydroxide conversion layers on Al and Zn by an in situ synchrotron study - Iuzviuk Mariia, Petersburg Nuclear Physics Institute named by B.P.Konstantinov of NRC «Kurchatov Institute» |
|
|
16:20 - 16:40 |
› Thermochemical Treatment of Titanium Alloys in Controlled Multicomponent Gas Media - Oleh Tkachuk, Karpenko Physico-Mechanical Institute of National Academy of Sciences of Ukraine |
|
|
16:40 - 17:00 |
› Effect of the surface activation by mechanical treatments on the low temperature nitrogen diffusion - Youssef Samih, Synergie4 (BrukerNano distributor) - Thierry Grosdidier, Laboratoire d'Excellence Design of Alloy Metals for low-mAss Structures, Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux |
|
|
15:40 - 17:00
|
Corrosion - C02 (Coulomb) |
(+)
|
|
15:40 - 16:00 |
› Use of chelating agents for in situ LDH formation on PEO treated active metals - Maria Serdechnova, Helmholtz-Zentrum Geesthacht |
|
|
16:00 - 16:20 |
› Functionalisation of PEO coatings on Mg and Al alloys using particles - Carsten Blawert, Helmholtz-Zentrum Geesthacht |
|
|
16:20 - 16:40 |
› Study on the effect of sodium carbonate salt as corrosion inhibitor for protection of AZ31 Magnesium alloy - Loïc Prince, Université de Mons |
|
|
16:40 - 17:00 |
› In situ LDH growth on bare magnesium alloy in the presence of chelating agents. New LDH conversion coatings for active corrosion protection of AZ91 magnesium alloy - Tatsiana Shulha, Helmholtz-Zentrum Geesthacht |
|
|
17:20 - 23:55
|
FUTUROSCOPE : visit, gala diner, evening show |
|
| Time |
Event |
(+)
|
|
08:30 - 09:10
|
Keynote (Da Vinci) |
|
|
09:10 - 10:30
|
Other Surface Treatments - ST1 (Da Vinci) |
(+)
|
|
09:10 - 09:30 |
› Influence of chemical and physical treatments on interfacial adhesion in hemp/epoxy composites investigated by fragmentation test. - Romain BARBIERE, Institut Pprime, Département Physique et Mécanique des Matériaux |
|
|
09:30 - 09:50 |
› Effect of microstructure design on ice adhesion for icephobic application – an experimental and numerical approach - Martin Hure, Institut Clémenet Ader (ICA), Université Paul Sabatier (UPS) |
|
|
09:50 - 10:10 |
› Multiscale Characterization of Polymer Abrasion using High Resolution Topographies - Robin Guibert, Laboratoire dÁutomatique, de Mécanique et dÍnformatique industrielles et Humaines - UMR 8201 |
|
|
10:10 - 10:30 |
› Use of a microwave plasma process at atmospheric pressure for bacterial disinfection - Laura Renoux, Institut de Recherche sur les CERamiques |
|
|
09:10 - 10:30
|
Other Coatings Technology - OC2 (Coulomb) |
(+)
|
|
09:10 - 09:30 |
› Effect of heat treatment on a novel tin-stabilized electroless nickel-boron coating. - Véronique Vitry, Metallurgy Lab, University of Mons |
|
|
09:30 - 09:50 |
› Elaboration of antibacterial PDMS surfaces through a simple and efficient photochemical method - yuzhen lou, Polymères Biopolymères Surfaces, Pascal THEBAULT, Nasreddine KEBIR |
|
|
09:50 - 10:10 |
› The MATUROLIFE project: A case study in multi-disciplinary research between materials science, design and electronic manufacturing - Andrew Cobley, Coventry University (UK) |
|
|
10:10 - 10:30 |
› Electroless plating route for the preparation of nickel-bonded cemented tungsten carbides - Alexandre Mégret, University of Mons - FABIENNE DELAUNOIS, University of Mons |
|
|
10:30 - 10:50
|
Coffee break (Rabelais) |
|
|
10:50 - 12:30
|
Other Surface Treatments - ST2 (Da Vinci) |
(+)
|
|
10:50 - 11:10 |
› Isocyanate biodegradable microcapsules for monocomponent adhesives - Ana Marques, CERENA, Departamento de Eng. Química, Instituto Superior Técnico, Universidade de Lisboa |
|
|
11:10 - 11:30 |
› Near-Liquid State Supersonic Nitrogen Jet for Surface Modification: impingement properties and jet/material interaction - Yassine HAJJI, Laboratoire d'Excellence Design of AlloyMetals for low-mAss Structure, Centre de Recherche d'Innovation et de Transfert de Technologies - Techniques Jets Fluides et Usinage- Carnot ICEEL |
|
|
11:30 - 11:50 |
› Surface modification of textile biomaterial by Supercritical N2 Jet (SCN2J) Technology : Mechanical and biological study - Yosri KHALSI, Centre de Recherche d'innovation et Transfert Technologique, Technique Jet Fluide et Usinage (CRITT TJFU), 2, Avenue de la grande terre, F-55000 Bar Le Duc, France, Laboratoire de Physique et Mécanique Textiles |
|
|
11:50 - 12:10 |
› Chlorine-based plasma etching of Fe-Cr alloys for the development of steel patterning: modeling, plasma diagnostics and etching rate measurements - feriel laourine, Centre de Nanosciences et Nanotechnologies, Institut Jean Lamour |
|
|
12:10 - 12:30 |
› Numerical simulation of the cavitating jet in the cavitation peening process - Zhaofeng Han, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne], Laboratoire de Mecanique des Fluides et d'Acoustique |
|
|
10:50 - 12:30
|
Other Coatings Technology - OC3 (Coulomb) |
(+)
|
|
10:50 - 11:10 |
› Fabrication and characterization of Mg-Al LDH films on as-cast Mg-xCa alloys - Liang Wu, Chongqing University [Chongqing] |
|
|
11:10 - 11:30 |
› Influence of the silver on biocompatibility of Ti-Cu based coatings produced by physical vapor deposition magnetron sputtering - Saqib Rashid, Dipartimento di Ingegneria [Roma] |
|
|
11:30 - 11:50 |
› Effect of reducing agent concentration on the properties of electroless nickel-boron coatings from a bath free of stabilizing agent - Muslum Yunacti, 1Université de Mons, Faculté Polytechnique, Service de Métallurgie, |
|
|
11:50 - 12:10 |
› Development and characterization of stainless steel/copper composite deposits made by hvof thermal spray - said Abdi, Laboratory of science and genius of materials ,faculty of mechanical and processes genius ,university of sciences and technology houari-boumediene |
|
|
12:30 - 17:00
|
END OF THE CONGRESS - Lunch: Cheese and wine buffet (Rabelais) |
|
|
Loading...